LAURON V

The robot has six metallic jointed legs, a green shell base and a mast with three cameras for a head.
LAURON is not afraid of rough environments. Photo: FZI Research Center for Information Technology

LAURON V is a bio-inspired six-legged walking robot designed to operate in areas that would be difficult for wheeled systems. It carries scientific payloads to monitor the environment and can use its legs for mobile manipulation tasks.

Creator

FZI Research Center for Information Technology

Year
2013
Country
Germany 🇩🇪
Categories
Features
LAURON demonstrates its capabilities. Video: FZI

More videos

Rate this Robot

Overall Rating

Would you want this robot?

Appearance

Neutral

Did you know?

The name LAURON stands for LAUfRoboter Neuronal Gesteuert, which in English means "walking robot neurally controlled," as the robot was originally fully controlled by neural networks.

The robots six legs are spread between a level and rocky angled terrain.
LAURON can traverse uneven surfaces. Photo: FZI Research Center for Information Technology
A pitch black image shows parts of the robot glowing green.
LAURON can glow in the dark. Photo: FZI Research Center for Information Technology

More Images

The hexapod robot walks on a red martian- like surface. Its movements are displayed on a monitor behind it.
LAURON on a simulated Mars mission. Photo: FZI Research Center for Information Technology
Close-up of two of the robots legs acting as hands, holding a rock tightly between them.
LAURON can do manipulation. Photo: FZI Research Center for Information Technology
An older skeletal model of the robot.
LAURON I was originally built in 1994. Photo: FZI Research Center for Information Technology

Specs

Overview

Able to perform fully autonomous exploration missions using 3D environment mapping, path planning, visual servoing, and other skills. Behavior-based control to handle slips and avoid falls. Leg length, walking patterns, and behaviors inspired by the common stick insect Carausius morosus.

Status

Ongoing

Year

2013

Website
Width
80 cm
Height
61 cm (84 cm with legs fully extended)
Length
90 cm
Weight
43.5 kg
Speed
0.5 km/h
Sensors

Each leg has four joints with Avago HEDS9040-B00 rotary encoders and custom code wheels, as well as current monitoring for every motor by the custom UCOM Boards. The head carries an Asus Xtion Pro Live, two high resolution Point Grey Firefly (FMVU-12S2C) cameras with tele- and wide-angle lenses or stereo camera setup, and a FLIR thermal camera. The body carries an additional Asus Xtion Pro Live camera at the back (for visual odometry), a Velodyne HDL-32E or a custom 3D laser scanner (KaRoLa) using a Hukuyo UTM-30LX, Avago absolute encoder, and Microstrain 3DM-GX5 IMU. Additional sensors are added based on the mission.

Actuators

28 motors in total. Each leg has four joints powered by Faulhaber 2657 012CR DC brushed motors with 26/1S planetary gearheads (ratio 66:1 and 159:1). Two motors are mounted on the side of the leg and drive the joints via a chain (additional 2:1 ratio). Two motors are mounted inside the body and actuate the moments via custom gearboxes including a worm drive. The head uses two smaller Faulhaber brushed DC motors with a custom 3D printed fixture and belt drive. The gripper and the rotating laser scanner use brushless Faulhaber 2250S024BX4 CSD motors with an integrated controller.

Degrees of Freedom (DoF)
28 (Legs: 4 DoF x 6; Head: 2 DoF; Gripper: 1 DoF; Laser scanner: 1 DoF)
Materials

Legs made from aerospace grade aluminum. Outer shell part milled POM plate (base), part 3D-printed PLA (base covers), and part custom cut PE (shell structure). Head and many covers for the gears and sensors and extensions such as a storage case are 3D-printed PLA. Gearboxes use high precision brass worm drives. All parts were custom designed and milled or printed.

Compute

Main computer (behavior and high level control): Mini ITX board (GIGABYTE GA-H87N-Wifi) with Intel Core i7 4x3.0 GHz, 8 GB RAM, Ethernet and CAN communications. Vision computer (object detection, visual odometry): Intel NUC i7. Leg controller (low level motor control): UCOM Universal Controller Module, custom with DSP and FPGA providing real-time control, quadrature encoder readout, current measurements, initialization routines, synchronization, and communication. Additional controller: Arduino for light control and Raspberry Pi for 3D laser scanner.

Software

Ubuntu 14.04 with ROS Indigo for high level control and MCA2 for low level control. High level control is done in the PLEXNAV framework, providing OMPL-based Planning, OpenCV, and PCL based object and environment recognition, SMACH based mission control, 3D SLAM with custom algorithms, custom motion executors and many many more packages both custom written and open source. Low level control is implemented in the custom MCA2 (Modular Controller Architecture) Framework using a behavior based approach. Fast behaviors govern the leg moments (swing, stance, hit obstacle reflex) while higher level behaviors keep the overall system stable. The motor controllers run cascaded PID position controllers.

Power

Two 24-V, 8000-mAh lithium-polymer battery packs in parallel, 2 hours of operation. Ability to hot swap battery packs during operation. External supply by a laboratory power supply at 24-V (5-20 A, ~10A main power) can be used on the fly.

Cost
€150,000 (approximately)